i5A-907 Receiving Card
i5A-907 is specially designed for the compact and portable LED displays, such as LED color screen or casting aluminum cabinet, etc. It inherits all the advantages and features i5A series had, adopts a new generation image processing core, and greatly improve the display effect; adopts a new generation of system architecture, and possesses more intelligent function and more stable system. Make its size and interfaces perfectly suit for LED color screen and casting aluminum display.
·Tiny size, special designed for the compact structure designs, like color screen and casting aluminum cabinet.
·Power supply from pin board without the need of external power supply, enhance hardware stability.
·New processing core, perfect in display effect.
·High refresh rate, high gray scale and high brightness with conventional chips.
·Perfect performance under lower grayscale status.
·Better detail processing: Partial dark at row, reddish at low gray, shadow problems can be solved.
·Support the effective display at first grayscale value.
·Support 14 bits high-precision point-by-point calibration in the Brightness and chromaticity.
·Support conventional chips, PWM chips and lighting chips, etc.
·Support any scan mode from static to 1/32 scan.
·Support any pumping point and data arbitrary offset, and realize various freeform display, spherical display, diamond display, creative display, etc.
·Support 16 groups RGBR’ signal output and 24 groups RGB in maximum.
·Large load capacity.
·Advanced design, high quality components, rigorous aging test, zero malfunction of final products.
·Wide working voltage range with DC 3.3 -6V.
·Support dual receiving card backup, loop backup, and dual-machine backup, etc.
·Compatible with S series Sender, Z series Sender and C series Sender, etc.
|Control system parameters|
|Sending device||Compatible with S series Sender, Z series Sender and C series Sender, etc|
|Control area of every card||Full-color: 256*256 Pixels, and for special applications the column can be extended to 1024 pixels.|
|Correction area of every card||256*256 pixels|
|Cascade control area of the largest regional||65536*65536 pixels|
|Cascade card number||65536 PCS|
|Network port exchange||Support, arbitrary use|
Nanosecond synchronization between the card and the card
|Refresh rate for conventional chip|
Static: 64*64, up to 16000Hz
1/8 scan: 128*128, up to 10000Hz
|Gray Level||Maximum 65536 levels|
|Minimum unit of OE values||8ns, 8ns multiples steps|
|Blanking Circuit||Support CD4051 blanking circuit|
|Gray scale compensation||Each level grayscale compensate separately|
|Display module compatibility|
Support conventional chips, PWM chips, lighting chips and other mainstream chips
|PWM chip supports||Support hundreds of different specifications of the PWM chip, such as MBI, MY, SUM, etc|
|Scan mode||Conventional mode and high refresh rate mode to support refresh rate multiplied|
|Scan type||Support static sweep to 1/32 scan|
|Module Specifications Support||Support 4096 pixels within any row, any column|
|The direction of the cable||Support route from left to right, from right to left, from top to bottom, from bottom to top|
|Data Sets||16 groups RGBR’ parallel data; 24 groups RGB parallel data|
|Data folded||Support to fold on the same or opposite direction, which improve refresh rate significantly|
|Module snapshot||Support any pumping point|
|Data serial transmission||RGB, R8G8B8, R16G16B16, etc in the form of serial|
|Compatible device and interface type|
UTP cable≤140M CAT6 cable≤170M
Optic fiber: Single Mode Fiber Transceiver≤20KM
Multi-Mode Fiber Transceiver ≤550M (Use RP Repeater to extend unlimited)
|Compatible with transmission equipment|
Gigabit switch, fiber transceiver, optical switches
|DC power interface||Wire terminal or HUB board|
|HUB Interface Type|
Refer to signal interface definition below
|Input voltage||DC 3.3V-6V|
|Storage and transport temperature||-50℃ to 125℃|
|Operating Temperature||-25℃ to 75℃|
|Body static resistance||2KV|
|Monitoring function (in conjunction with mutil-function card)|
|Monitoring functions||Real time monitoring environment information like temperature, humidity, smoke|
|Remote Control||Support for relay switch to turn on/off the power supply of equipments remotely|
|Pixel level calibration|
Support loop backup and dual-machine backup
Consult our technicians for more details
Support various freeform display, spherical display, creative display, etc. through the data arbitrary offset